• +49 231 96450 - 01
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Mo - Thu: 8:00 - 16:30 o’clock and. Fr: 8:00 - 15:00 o’clock.

GIS Internal gripper lowering

GIS Internal gripper lowering

Operating mode:                                        
•   The internal grippers dip into drillings, enlarge their external diameter by expansion of the silicone membrane under pressure, and thus frictionally engaged hold to the bore wall. When pressure is switched off, the silicone membrane retracts into the grippers due to its elastic behavior.                                 
                                        
Advantages:                                        
•    Minimum installation size possible
•    Width across flats for assembly
•    Minimum installation depth
•    Low gripper weight
•    Simple gripper principle
•    Cost-efficient
•    Quick diaphragm replacement possible
•    Indirect request via pressure switch in the supply line possible  

watch demo video

 

GIS Internal Gripper Abatement
Pos. Description
1 Hull
2 Mandrel
3 Tube
4 Counter sunk screw
You will find our order numbers on the
bottom side of the respective frame sizes.
g-gis008-exp.png
Please select Desc. Ø-bore (mm) Workpart-weight (kg)

005-008
GIS005 5,1 – 6,0 0,4
GIS006 6,1 – 7,0 0,5
GIS007 7,1 – 8,0 0,7
GIS008 8,1 – 9,0 1,7

009-012
GIS009 9,1 – 10,0 1,7
GIS010 10,1 – 11,0 2
GIS011 11,1 – 12,0 2,5
GIS012 12,1 – 13,5 3

013-016
GIS013 13,1 – 14,5 4
GIS014 14,1 – 15,5 4,5
GIS015 15,1 – 16,5 4,5
GIS016 16,1 – 17,5 5

017-020
GIS017 17,1 – 18,5 5
GIS018 18,1 – 19,5 5
GIS019 19,1 – 21,0 6
GIS020 20,1 –21,5 6