• +49 231 96450 - 01
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Mo - Thu: 8:00 - 16:30 o’clock and. Fr: 8:00 - 15:00 o’clock.

GI Internal gripper

GI Internal gripper

Operating mode:                                        
•    The internal grippers dip into drillings, enlarge their external diameter by expansion of the silicone membrane under pressure, and thus frictionally engaged hold to the bore wall. When pressure is switched off, the silicone membrane retracts into the grippers due to its elastic behavior.                                   
                                        
Advantages:                                        
•    Minimum installation size possible
•    Low gripper weight
•    Simple gripper principle
•    Cost-efficient
•    Quick diaphragm replacement possible
•    Indirect request via pressure switch in the supply line possible  

watch demo video

 

GI Internal Gripper
Pos. Description
1 Hull
2 Mandrel
3 Tube
4 O-Ring 1
5 O-Ring 2
You will find our order numbers on the
bottom side of the respective frame sizes.
g-gi008_exp.png
Please select Desc. Ø-bore (mm) workpart-weight (kg)

005-008
GI005 5,1 – 6,0 0,4
GI006 6,1 – 7,0 0,5
GI007 7,1 – 8,0 0,7
GI008 8,1 – 9,0 1,7

009-012
GI009 9,1 – 10,0 1,7
GI010 10,1 – 11,0 2
GI011 11,1 – 12,0 2,5
GI012 12,1 – 13,5 3

013-016
GI013 13,1 – 14,5 4
GI014 14,1 – 15,5 4,5
GI015 15,1 – 16,5 4,5
GI016 16,1 – 17,5 5

017-020
GI017 17,1 – 18,5 5
GI018 18,1 – 19,5 5
GI019 19,1 – 21,0 6
GI020 20,1 – 21,5 6