• +49 231 96450 - 01
  • This email address is being protected from spambots. You need JavaScript enabled to view it.
  • Mo - Thu: 8:00 - 16:30 o’clock and. Fr: 8:00 - 15:00 o’clock.

MGW Manual gripper change system

MGW Manual gripper change system

Operation mode:

  • By rotating the semi-cylindrical bolt by 180° the upper part (1) and  the lower part (2) are braced in a form-closed manner

Advantages:

  • Withstands high loads with low dead weight
  • Intuitive operation
  • Can be released and closed with one handle
  • Resilient locking pin secures hand lever against independent releasing
  • Holds up to 5.000 changing cycles
  • During locking, the lower part is pulled around the locking stroke
  • Interface according to DIN EN ISO 9409-1

watch demo video

MGW manual Gripper Changing System tool changer
Pos. Description
1 Upper part
2 Semi-cylindrical bolt
3 Hand lever
4 Index pin
5 Cylinder pin
6 Spring locking pin
7 Setscrew
8 Lower part
You will find our order numbers on the bottom side of the respective frame sizes.
manual tool changer
please select Ø x height (mm) Desc. material Mass (kg) Load.* (kg) MEK-Option

050
50 x 30 MGW050 Alu. anodized 0,2 10
MGW050-N Steel, nitrated 0,42 16
MGW050-V Stainless steel VA 14

063
63 x 32 MGW063 Alu. anodized 0,35 16
MGW063-N Steel, nitrated 0,72 22
MGW063-V Stainless steel VA 20

080
80 x 37 MGW080 Alu. anodized 0,6 20
MGW080-N Steel, nitrated 1,45 28

100
100 x 45 MGW100 Alu. anodized 1,1 28
MGW100-N Steel, nitrated 2,6 39

125
125 x 50 MGW125 Alu. anodized 1,9 40
MGW125-N Steel, nitrated 4,4 55

160
160 x 70 MGW160 Alu. anodized 4,1 75
MGW160-N Steel, nitrated 10,5 120